Are Shimano Rear Derailleurs Interchangeable? Trust The Answer

Are you looking for an answer to the topic “Are Shimano rear derailleurs interchangeable?“? We answer all your questions at the website Ecurrencythailand.com in category: +15 Marketing Blog Post Ideas And Topics For You. You will find the answer right below.

Keep Reading

Are Shimano Rear Derailleurs Interchangeable?
Are Shimano Rear Derailleurs Interchangeable?

Are all Shimano derailleurs the same?

Shimano mountain bike derailleur compatibility

Just for clarity, current generation (10-, 11- and 12-speed) Shimano road and mountain bike components are not inter-compatible with each other because they use different cable pull ratios.

Are Shimano drivetrains interchangeable?

When SRAM entered the road groupset market in 2006, it decided to adopt Shimano’s specifications for its chains and cassettes. As a result, the chains and cassettes from the two brands have always been completely interchangeable for any given type of transmission (e.g. 11-speed).


Shimano Shifter / Derailleur Compatibility Guide: Intro to Cable Pull Ratios

Shimano Shifter / Derailleur Compatibility Guide: Intro to Cable Pull Ratios
Shimano Shifter / Derailleur Compatibility Guide: Intro to Cable Pull Ratios

Images related to the topicShimano Shifter / Derailleur Compatibility Guide: Intro to Cable Pull Ratios

Shimano Shifter / Derailleur Compatibility Guide: Intro To Cable Pull Ratios
Shimano Shifter / Derailleur Compatibility Guide: Intro To Cable Pull Ratios

Are rear derailleurs universal?

A derailleur for your mountain bike should match the specifications on the original derailleur. That is, while it doesn’t need to be the same model of derailleur, it does need to be the same brand, in almost every case. It also needs to match the number of gears, or have more intended.

Can rear derailleurs swap?

Yes, it is possible to convert your Ultegra SS rear derailleur to a GS rear derailleur. We have done this switch in my shop to get a wider gear range on a new Dura-Ace Di2-equipped bicycle, by switching parts between Ultegra and Dura-Ace Di2 rear derailleurs.

Will any shifter work with any derailleur?

No, different maker or different model with different number of “speed” shifters have different pull ratio (i.e. the length of cable pulled by a single shift). Usually it’s safe to use different model with same number of gears from the same maker.

Can you mix and match Shimano components?

It is possible to mix and match as long as you get components from the same generation. For example: 9000 Dura Ace, 6800 Ultegra, and 5800 105 are all cross compatible. Each have 11-speeds in the rear, use the same cable pull per shift and use the same front derailleur design.

Are Shimano 105 and Ultegra compatible?

ULTEGRA, 105 and TIAGRA parts are compatible with each other as long as they have the same number of gears. Note that ULTEGRA and 105 are only available in the older generation of 2×10 speed (ULTEGRA: 6700 series ゙, 105: 5700 series), while TIAGRA only offers 2×10 speed.


See some more details on the topic Are Shimano rear derailleurs interchangeable? here:


Complete guide to rear derailleurs – BikeRadar

Most 8- and 9-speed Shimano mountain bike and road kit is inter-compatible because they both use the same cable pull ratio. This means that you …

+ Read More

Compatibility [04] Rear derailleurs | BikeGremlin

Rear shift ratio is 1.9. They are compatible only with Shimano Dura Ace shifters from the same period (that is for 6, 7 and 8 speeds). 10 speed …

+ View More Here

Science Behind the Magic | Drivetrain Compatibility – Art’s …

Basically everything Shimano did up until then was cross compatible. They used a derailleur shift ratio of 1.7 on everything. While the cable …

+ Read More Here

Mixing road groupsets: what works together and what doesn’t

There is a limit to the size of the sprockets that can be used with any given rear derailleur. It’s a physical constraint based on the geometry …

+ View Here

Are Shimano 10 and 11 speed compatibility?

You can certainly use a Shimano 10-speed double crank and chainrings with Shimano 11-speed chain, derailleurs, shifters and cassette, however.

Can I use a 7 speed derailleur on an 8 speed cassette?

8 speed shifter and cassette, 7 speed derailleur? You’ll be fine. There’s no “probably” about it. 6-, 7- and 8-speed gear is all cross-compatible in terms of chain width.

Can I use a 9 speed derailleur on a 8 speed cassette?

yes you can use the derailer on the 8 speed cassette. The major difference between 8 and 9 speed is indexing. So for an 9 speed cassette you would need 9 speed shifters.

Can I use 12 speed derailleur with 11 speed cassette?

So there you go folks, there is no difference in indexing spacing between 11 and 12 speed, the difference is all at the derailleur end. So you can’t use a 12 speed derailleur on an 11 speed setup or vice versa but you can you an xtr 12/11 speed shifter on an 11 speed drivetrain.


Does Shimano Work With SRAM? | #AskGMBNTech Drivetrain Special

Does Shimano Work With SRAM? | #AskGMBNTech Drivetrain Special
Does Shimano Work With SRAM? | #AskGMBNTech Drivetrain Special

Images related to the topicDoes Shimano Work With SRAM? | #AskGMBNTech Drivetrain Special

Does Shimano Work With Sram? | #Askgmbntech Drivetrain Special
Does Shimano Work With Sram? | #Askgmbntech Drivetrain Special

Can I upgrade derailleur?

The number of gears supported changes

The higher the grade of Shimano rear derailleur, the more gears it can handle. For both road bikes and MTBs, 12-speed is the maximum number of gears supported. Of course, upgrading between 11-speed derailleurs will not change the number of gears supported.

Can I use a 9-speed derailleur on a 7 speed cassette?

Can I use a 9-speed derailleur on a 7-speed cassette? The answer is yes because the rear shift ratio of 9-speed and 7-speed derailleurs is the same if you stay within the same brand.

What Shimano derailleur do I have?

Shimano stamps the rear derailleur model number on the underside/lower plate of the parallelogram. All models for the last several decades.

Can I use 11 speed derailleur with 9-speed cassette?

With Campagnolo, yes. From 9 to 11 speeds, cable pull is the same.

Can I use 10 speed derailleur with 11 speed cassette?

You can use the 10 speed rear dérailleur on an 11 speed cassette with no issues at all but you can not use 10 speed shifters on an 11 speed cassette.

Will any Shimano shifter work?

Shimano shifters, whether for 6, 7, 8, or 9 speeds are compatible with all the Shimano RDs for 6 to 9 speeds, and with Shimano 10 speed road RDs (not with 10 speed MTB RDs). Update: a new exception are Shimano Tiagra 4700 road 10-speed shifters, and Shimano GRX gravel series shifters.

How do I know what model Shimano shifter I have?

The shifter can be identified by model number, which is stamped on the plastic perch (under the rubber hood).

Can I use a 9 speed shifter with a 7 speed cassette?

If you used a 7 speed cassette, with a 9 speed shifter and 7 speed derailleur you would not pull enough cable and the shifts will get mangled. If you are currently on 7 Speeds, this means you have a 7 speed wheel that will most likely NOT take a 9 speed cassette.

Are Shimano Chainsets interchangeable?

Shimano Crankset Parts are not interchangeable, but they are compatible. What is this? Shimano makes many types of cranksets geared for different cyclists. All Shimano Chainsets are not the same.


Shimano Ultegra 6800 Rear derailleur: how to Service Overhaul clean dissembled

Shimano Ultegra 6800 Rear derailleur: how to Service Overhaul clean dissembled
Shimano Ultegra 6800 Rear derailleur: how to Service Overhaul clean dissembled

Images related to the topicShimano Ultegra 6800 Rear derailleur: how to Service Overhaul clean dissembled

Shimano Ultegra 6800 Rear Derailleur: How To Service Overhaul Clean Dissembled
Shimano Ultegra 6800 Rear Derailleur: How To Service Overhaul Clean Dissembled

Are all Shimano cassettes compatible?

All Shimano and SRAM cassettes up to 10 speed are broadly compatible. They all use Shimano’s Hyperglide II freehub body spline pattern. Cassettes with the same number of sprockets have the same sprocket spacing, sprocket width and overall width.

Can you use Ultegra crankset with 105 derailleur?

Both 105 and Ultegra are 11-speed systems. 105 cassettes (above) are available in 11-28-tooth, 11-30, 11-32, 11-34 and 12-25 options. Ultegra is available in all of those plus 11-25 and 14-28. There’s no reason why you can’t use an Ultegra cassette with an otherwise 105 groupset, or vice versa.

Related searches to Are Shimano rear derailleurs interchangeable?

  • shimano rear derailleur 8 speed
  • shimano rear derailleur 7 speed
  • are rear derailleurs universal
  • are shimano rear derailleurs interchangeable
  • shimano 9 speed rear derailleur
  • are shimano derailleurs interchangeable
  • shimano rear derailleur capacity chart
  • shimano 11-speed compatibility chart
  • shimano 10 speed road shifters with mtb derailleur
  • shimano front derailleur compatibility chart
  • shimano pull ratio chart
  • shimano 10 speed rear derailleur
  • shimano 10 speed compatibility chart
  • shimano 10-speed compatibility chart

Information related to the topic Are Shimano rear derailleurs interchangeable?

Here are the search results of the thread Are Shimano rear derailleurs interchangeable? from Bing. You can read more if you want.


You have just come across an article on the topic Are Shimano rear derailleurs interchangeable?. If you found this article useful, please share it. Thank you very much.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *