Are you looking for an answer to the topic “What is gear ratio for a 1998 Jeep Wrangler?“? We answer all your questions at the website Ecurrencythailand.com in category: +15 Marketing Blog Post Ideas And Topics For You. You will find the answer right below.
Keep Reading
Table of Contents
What is my Jeep Wrangler gear ratio?
So an easy way to determine your actual gear ratio is to check the tag attached to the differential cover by the cover bolts. On the tag there should be some numbering such as 3.54 or 3.73, either of those numbers will give you the stock axle ratio.
What gear ratio is a 1997 Jeep Wrangler TJ?
The Axle Ratios For The ’97 30 And 35c Went Unchanged From YJ Years. The 2.5L With Manual Trans Got 4.11s For The Manual Or 3.73s With The Auto, While The Stick-Equipped 4.0L Got 3.07s, Or 3.55s With The Auto.
3 Ways to Find Gear Ratios: Jeep Wrangler YJ Gear Ratios
Images related to the topic3 Ways to Find Gear Ratios: Jeep Wrangler YJ Gear Ratios
What gear ratio is a Dana 30?
| Ring and Pinion Gear Sets – For use with Dana® Axles | |
|---|---|
| Ring & Pinion Gears for use with Dana 30™ & M186 | Sierra Gear & Axle Part # |
| Dana 30™ – 3.54 Ratio R&P | SG D30-354 |
| Dana 30™ – 3.73 Ratio R&P | SG D30-373 |
| Dana 30™ – 4.10 Ratio R&P | SG D30-411 |
What gear should my Jeep Wrangler be in?
There is nothing you really need to do in 2H, as this is the position your vehicle should always be in for your every day driving. 4 Hi or 4H: This position is used for normal speed driving but for when you need a little bit extra traction like on dirt roads, hard packed sand or slick/snowy/icy roads.
How do I know what gear ratio I have?
The calculation uses the number of teeth in the ring gear and divides it by the number of teeth in the pinion gear to provide you with a “[result] to 1” ratio. For example, if the pinion gear has 41 teeth, and the ring gear has 11 teeth, the ratio would be calculated as 41/11, which is equal to 3.73 = 3.73:1.
How do I know my rear gear ratio?
Turn the wheel TWO revolutions and count the number of driveshaft turns. The number of driveshaft rotations will help you determine your rear axle ratio. For example, if it turned 3 and a half times, it’s a 3.50:1 ratio. If it turned 4 and a quarter times, it’s a 4.25:1 ratio.
What is the stock gear ratio in Jeep Wrangler TJ?
The stock gear ratio tends to vary depending on the year and package your Jeep has. Some of the possible ratios include 3.07, 3.55, 3.73, and 4.10. Wranglers that are equipped with the Rubicon package typically come with the 4.10 gear set in their Dana 44 axles.
See some more details on the topic What is gear ratio for a 1998 Jeep Wrangler? here:
1998 TJ 4 cylinder Gear Ratios? | Jeep Wrangler Forum
I’m wondering if anybody on here could tell me what the gear ratio is? From what I understand, ALL 2.5L 4cylinder TJ’s have stock 4.10s.
How To Determine A Jeep Wrangler Axle Differential Ratio
Knowing what axle ratio — commonly referred to as a gear ratio — you have can be very helpful when deciding on larger tires. If you are unsure of the gear ratio …
Stock axle gear ratio on ’97 TJ Wrangler Sport? – Jeep Forum
Yes, and the ’97 TJ is the only model year TJ that came with 3.55 from the factory. They switched from 3.55 to 3.73 for the ’98 model year TJ. : …
When & Why You Should Regear Your Wrangler – Extreme …
The stock gear ratio tends to vary depending on the year and package your Jeep has. Some of the possible ratios include 3.07, 3.55, 3.73, and 4.10. Wranglers …
What axles are in my Jeep TJ?
What Axles Do I Have in My Jeep? Identifying the axles in YJs is pretty simple since there were no options for it. Every YJ came with a Dana 30 up front and a Dana 35 in the rear. TJ Wranglers will have either a Dana 30 in the front and a Dana 35 in the rear unless you have a Rubicon model.
Can a Dana 30 handle 35s?
Brian, there is no definitive rule of thumb when it comes to running 35-inch tires under a JK with a Dana 30 front axle. Yes, you may twist your axle housing or explode the carrier running 35s, but you could do just the same running 33s.
What Jeeps have a Dana 30 front axle?
All YJs have a Dana 30 in the front and a Dana 35 in the rear. Jeep returned with the original round headlights with its 2ndgeneration TJ along with a coil-spring suspension system for a smoother ride. Jeep introduced the inaugural Rubicon trim level on the 2003 TJ, geared toward off-roaders.
How To Calculate What Gear Your Jeep Wrangler TJ 97-06 Needs For Changing Tire Size
Images related to the topicHow To Calculate What Gear Your Jeep Wrangler TJ 97-06 Needs For Changing Tire Size
What vehicles have a Dana 35?
The Dana 35 (as well as the AMC-15) is found in a wide variety of vehicles. The most common Dana 35 applications are as a rear axle in the Jeep Cherokee, Jeep Wrangler, and Jeep Comanche and as a front axle in the Ford Explorer and Ford Ranger.
Do I have to Regear with 35s?
So, do you need a 4in lift to run 35’s – NO. Should you regear – YES.
What gear ratio is best for 33 inch tires?
4.56 works well for the 3-speed automatic and 33’s, 4.88 is optimal for the 5-speed manual transmission. With the 4-speed automatic, 4.88 isn’t even enough for 35’s.
How much does it cost to change the gear ratio in a Jeep Wrangler?
Depending on your type of Jeep, what you want to be done, and where you get it done, it will cost anywhere from $1,200 on the low end to $3,000 on the high end. This price range typically includes parts and labor done by a professional.
How do I know what rear end my Jeep has?
The first thing to do is to identify the axle by cleaning the fill plug on the back cover. Look at the inscription of the plug to find out the style of the rear end. In this example, Rich has a “Dana” style rear end.
What is a 3.73 rear axle ratio?
A numerically higher axle ratio provides a mechanical advantage to send more of the engine’s available torque to the rear tires (and front tires, in a four-wheel drive vehicle), but you pay the price at the fuel pump. So, a truck with optional 3.73 gears will tow a heavier trailer than one with 3.55 or 3.21.
How do I know what size differential I have?
To figure out exactly what axle you have, you can look for the Dana stamped bill of materials number. This stamped number can usually be found on the righthand side or on the longer axletube on the same side of the tube as the differential cover, facing the rear of the truck.
What is the best rear end gear ratio?
The most popular rear-end ratio in trucks today is the 3:55, which sort of averages towing power and fuel economy. This is a good ratio for the occasional towing or hauling individual. For a person who tows more often, and heavier loads, the 3:73 or 4:10 may be more appropriate.
What does Jeep Wrangler TJ stand for?
TJ stands for “True Jeep“.
How to Choose Your Axle Gear Ratio
Images related to the topicHow to Choose Your Axle Gear Ratio
Are 3.73 gears good for 35 tires?
You will be fine. Just gonna lose mpg and slow your truck down. I have run 35s with 3.73s and no issues at all. In fact, my recent Plat had a 4-inch lift, heavy 34.5 inch Nitto Trails, and 3.55 gears, and ran great!
Can you run 33s on a stock TJ?
Premium Member. To answer your question 33s will not work on a stock TJ. Your best bet is to go with 31s.
Related searches to What is gear ratio for a 1998 Jeep Wrangler?
- what is gear ratio for a 1998 jeep wrangler 2.5
- what is gear ratio for a 1998 jeep wrangler x
- 2004 jeep wrangler x gear ratio
- jeep tj gear change
- jeep tj 2 5 gear ratio
- what is gear ratio for a 1998 jeep wrangler 4.0
- jeep wrangler tj gear ratio chart
- 2021 jeep wrangler gear ratio
- what is gear ratio for a 1998 jeep wrangler tj
- what is gear ratio for a 1998 jeep wrangler worth
- 2003 jeep wrangler rubicon gear ratio
- best gear ratio for 35 inch tires jeep tj
- 1997 jeep wrangler gear ratio
- what is gear ratio for a 1998 jeep wrangler yj
- jeep tj 2.5 gear ratio
Information related to the topic What is gear ratio for a 1998 Jeep Wrangler?
Here are the search results of the thread What is gear ratio for a 1998 Jeep Wrangler? from Bing. You can read more if you want.
You have just come across an article on the topic What is gear ratio for a 1998 Jeep Wrangler?. If you found this article useful, please share it. Thank you very much.
