Are you looking for an answer to the topic “Which machinery material is used for cost reduction?“? We answer all your questions at the website Ecurrencythailand.com in category: +15 Marketing Blog Post Ideas And Topics For You. You will find the answer right below.
5. Which masonry material is used for cost reduction? Explanation: Concrete blocks consume only 1/3rd of energy used in the production of red bricks. It reduces the wall thickness from 20 to 15cm, and mortar also.Explanation: Metal roof is the most durable one that can even last 100 years. It provides heat and cold resistance and it is easily installed. Asphalt, plastic and rubber are recycled materials but don’t last long. In terms of life, metal roofs are most cost effective.8. Which is the most commonly employed drying method in India? Explanation: Natural drying employs workers and it is more economical in India than using artificial driers. Hot floor drier and tunnel drier are types of artificial drying method.
Table of Contents
Which of the below roofing materials is most cost effective?
Explanation: Metal roof is the most durable one that can even last 100 years. It provides heat and cold resistance and it is easily installed. Asphalt, plastic and rubber are recycled materials but don’t last long. In terms of life, metal roofs are most cost effective.
Which is the most commonly employed drying method in India?
8. Which is the most commonly employed drying method in India? Explanation: Natural drying employs workers and it is more economical in India than using artificial driers. Hot floor drier and tunnel drier are types of artificial drying method.
Cost Reduction Techniques in Manufacturing – Preview of Training Module – ACTSol and Associates
Images related to the topicCost Reduction Techniques in Manufacturing – Preview of Training Module – ACTSol and Associates
In which cement mortar is reinforced with wire meshes?
In ___________ cement mortar is reinforced with wire meshes. Clarification: It is a highly versatile form of R.C.C. Cement mortar is reinforced with layers of continuous and relatively small wire meshes.
How many types of combined footing are possible Mcq?
How many types of combined footing are possible? Explanation: Combined footing is provided when 2 columns are very close by. They can be rectangular or trapezoidal in section. Explanation: CPRF uses the combination of pile and raft foundation as the name suggests.
What is FRC in construction?
Fiber-reinforced concrete or fibre-reinforced concrete (FRC) is concrete containing fibrous material which increases its structural integrity. It contains short discrete fibers that are uniformly distributed and randomly oriented.
Which equipment is used to test the setting time of cement?
AUTOVICAT by IBERTEST is an equipment for automatic execution of determination of setting time and consistency of cement test by Vicat method.
Where is pug mill used?
A pugmill or pug mill is a machine in which clay or other materials are mixed into a plastic state or a similar machine for the trituration of ore. Industrial applications are found in pottery, bricks, cement and some parts of the concrete and asphalt mixing processes. A pugmill may be a fast continuous mixer.
See some more details on the topic Which machinery material is used for cost reduction? here:
Materials Engineering for Cost Reduction – Industrial …
One approach to cost reduction is to re-engineer products to use less expensive materials or reduced quantities of higher priced materials.
Material & Machine Cost Reduction (Part 3 of 3) – BMA
In this blog, I want to dive deeper into material cost and machine cost to explain how lean organizations measure these cost reduction and the …
250+ TOP MCQs on Cost Effective Construction Techniques …
5. Which masonry material is used for cost reduction? … Clarification: Concrete blocks consume only 1/3rd of energy used in the production of red bricks. It …
4. Labor, Material and Equipment Utilization – Carnegie …
In one project, a 6% reduction in craft labor costs occurred due to the improved availability of materials as needed on site. On other projects, an 8% …
How is the hardness of brick tested?
How is the hardness of brick tested? Explanation: Brick is scratched using finger nail. If there are no visible scratches made on the brick surface, it is said to be sufficiently hard.
What is moulding of bricks?
Moulding is the process where the prepared clay is placed in a mould which forms it into the shape of a brick. There are two methods of hand moulding bricks: the slop moulding method and the sand moulding method.
Which bitumen does not need heating?
10. Which bitumen does not need heating? Explanation: The cutback bitumen which is the most economical type may or may not require heating, whereas the remaining required to be heated.
What is the content of clay and silt in good brick earth?
Ans. [A] is Correct. Clay or Alumina Content 20-30%. Silt Content -30%.
What is meant by workability of concrete?
What is the Workability of Concrete? Workability of Concrete is a broad and subjective term describing how easily freshly mixed concrete can be mixed, placed, consolidated, and finished with minimal loss of homogeneity.
Ideas For Cost-Reduction in Manufacturing.
Images related to the topicIdeas For Cost-Reduction in Manufacturing.
What is DPC full form?
The full form of “DPC” is “Damp Proof Course“, where “D” stands for “Damp“, “P” stands for “Proof” and “C” stands for “Course”.
What is pier foundation?
A pier foundation is a collection of large diameter cylindrical columns to support the superstructure and transfer large super-imposed loads to the firm strata below. It stood several feet above the ground. It is also known as “post foundation”.
What is level below window called?
Explanation: The wall below window needs to support the weight of the window or opening and keep it steady. This level is called as sill level.
Which fiber is best for concrete?
Polypropylene fiber reinforced concrete is also known as polypropene or PP. It is a synthetic fiber, transformed from propylene, and used in a variety of applications. These fibers are usually used in concrete to control cracking due to plastic shrinkage and drying shrinkage.
What is shotcrete used for?
In building repairs, shotcrete is commonly used for repair of fire and earthquake damage and deterioration, strengthening walls, and encasing structural steel for fireproofing. The repair of structural members such as beams, columns, and connections is common for structures damaged by an earthquake.
What fiber is used in concrete?
What fibers are used in concrete? A. Short fibers produced from steel, glass, and organic polymers (“synthetic” fibers) are used to enhance the cracking-related properties of fiber-reinforced concrete (FRC). Naturally occurring vegetable fibers, such as sisal and jute, are also used.
What is green cement?
Green cement is a form of cement produced with the help of a “carbon-negative manufacturing process.” In other words, cement produced as the final product of a technologically advanced process, such that emissions during unit operations (like clinker production) are minimized, is referred to as green cement.
What is the use of slump cone test?
Slump test is the most commonly used method of measuring consistency of concrete which can be employed either in laboratory or at site of work. It is not a suitable method for very wet or very dry concrete.
Which machine is preferred for abrasion test?
Which machine is preferred for abrasion test? Explanation: Los Angeles is preffered for abrasion test for carrying out the hardness property and has been standardized in India.
What is tempering in brick?
Tempering of clay: It is the process of adding water to the clay and allowing it to remain un-disturbed for few days before mixing occurs.
Cost Reduction Program: 5 Strategies and 60 Tactics for Impact
Images related to the topicCost Reduction Program: 5 Strategies and 60 Tactics for Impact
What is pug in construction?
vb (tr) , pugs, pugging or pugged. 1. ( Ceramics) to mix or knead (clay) with water to form a malleable mass or paste, often in a pug mill. 2. ( Building) to fill or stop with clay or a similar substance.
What is pug mix gravel?
Pug Mix or Pug Mill, is a special mix of Crusher Run Gravel, sand, fine lime powder dust and water. This gravel is typically used for road building, concrete slabs, and sidewalks but can also be used for your driveway, parking area or walking path.
Related searches to Which machinery material is used for cost reduction?
- what type of cost is direct material
- which machine material is used for cost reduction
- in mechanical machining material is removed by
- how to calculate cost of materials used
- is machinery a fixed cost
- what is material cost control
- what are reduce materials
- material cost reduction strategy
- which of the following mechanism is used for material removal
- which masonry material is used for cost reduction
Information related to the topic Which machinery material is used for cost reduction?
Here are the search results of the thread Which machinery material is used for cost reduction? from Bing. You can read more if you want.
You have just come across an article on the topic Which machinery material is used for cost reduction?. If you found this article useful, please share it. Thank you very much.
